SAX-100.4D

The SAX-100.4 is built to the same exacting standards as the SAX-125.2 but adds another set of channels and more advanced crossovers. It's flexible crossovers allow the user to run a 2-way active speaker setup with no external processing. It packs enough punch that one could also run a set of front speakers with one pair of channels and a subwoofer, bridged, on the other pair of channels for use as a total system amplifier where high power is not required.

The latest "D" revision features industry leading crossover flexibility even more advanced than prior versions and also features and upgraded power supply section for more power and enhanced longevity.

SPECIFICATIONS:

  • 4/3/2 Channel Bridgeable Class-AB Amplifier
  • MOSFET PWM Power Supply
  • Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load
  • Variable Subsonic Filter
  • Independent 1/2 and 3/4 Channel High Pass Filter Variable
  • with x 10 Range Selectable Switch
  • Independent 1/2 and 3/4 Channel Low Pass Filter Variable
  • with x 10 Range Selectable Switch
  • HPF/FULL/LPF Selectable Switch
  • Independent 1/2 and 3/4 Channel Electronic Crossover Slope Selectable
  • Switch with 12dB and 24dB Octave
  • Variable Input Level Control
  • Input Sensitivity : 200mV ~ 6V
  • Subsonic Filter : 10Hz ~ 500Hz
  • Signal Input and Line Out RCA Connectors
  • Multi-Way Protection circuitry (Thermal/Over Current/Speaker Short/Speaker DC protection)
  • Tested Voltage & THD: 14.4V & Less than 0.05% THD
  • Operating Voltage : DC10V~16V Power Input
  • Wired Remote Controller
  • MSRP $549 USD
PRODUCT MANUAL
Rated power output  

----RMS power, 4 ohm stereo

 100W x 4CH

----RMS power, 2 ohm stereo

 160W x 4CH

----RMS power, 4 ohm bridged

 320W x 2CH
Signal to Noise Ratio >90dB
Low pass frequency crossover

50Hz~5kHz (CH1&2)
50Hz~5KHz (CH3&4)
(50-500 with x10 switch)
Selectable 12 or 24 dB slope

High Pass Crossover

50Hz~5kHz (CH1&2)
50Hz~5kHz (CH3&4)
(50-500 with x10 switch)
Selectable 12 or 24 dB slope
Variable Subsonic Filter 10Hz to 500Hz
Frequency Response 10Hz ~ 40KHz (+/-1dB)
Bass Boost 0~18dB
Variable Bass-Boost Frequency Control 35Hz to 120Hz
THD@RMS Watts <0.1%
Channel Separation 75dB
Fuse Rating 30A x 3
Input Sensitivity Variable 200mV~6V (+/- 5%)
Dimensions 252(W) x 58(H) x 480(L)mm