SAX-50.4

The SAX-50.4 was designed as a "little brother" to the SAX-100.4 for those that do not need as much power and/or have limited space to work with. The SAX-50.4 matches very well with the SAZ-1000D as a complete amplification system.

The same crossover features as the SAX-100.4 "C" revision are included.

 

SPECIFICATIONS:

  • 4/3/2 Channel Bridgeable Class-AB Amplifier
  • MOSFET PWM Power Supply
  • Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load
  • 12dB Octave Electronic Crossover Slope
  • Variable Subsonic Filter
  • Independent 1/2 Channel High Pass Filter Variable with x 10 Range Selectable Switch
  • Variable 1/2 Channel Low Pass Filter with HPF/FULL/LPF Selectable Switch
  • Independent 3/4 Channel Low Pass Filter Variable with x 10 Range Selectable Switch
  • Variable 3/4 Channel High Pass Filter with HPF/FULL/LPF Selectable Switch
  • Independent 1/2 and 3/4 Channel Bass Boost Variable Control
  • Variable Bass-Boost Frequency Control
  • Variable Input Level Control
  • Input Sensitivity : 200mV ~ 6V
  • Subsonic Filter : 10Hz ~ 500Hz
  • Signal Input and Line Out RCA Connectors
  • Multi-Way Protection circuitry (Thermal/Over Current/Speaker Short/Speaker DC protection)
  • Tested Voltage & THD: 14.4V & Less than 0.05% THD
  • Operating Voltage : DC10V~16V Power Input
  • Wired Remote Controller
  • MSRP $349 USD
PRODUCT MANUAL
Rated power output  

----RMS power, 4 ohm stereo

 50W x 4CH

----RMS power, 2 ohm stereo

 80W x 4CH

----RMS power, 4 ohm bridged

 160W x 2CH
Signal to Noise Ratio >90dB
Low pass frequency crossover


 50Hz~500Hz (CH1&2)
50Hz~5KHz (CH3&4)
High Pass Crossover

 50Hz~5KHz (CH1&2)
50Hz~500Hz (CH3&4)
Variable Subsonic Filter 10Hz to 500Hz
Bass Boost 0~18dB
Variable Bass-Boost Frequency Control 35Hz to 120Hz
Frequency Response 10Hz ~ 40KHz (+/-1dB)
THD@RMS Watts <0.1%
Channel Separation 75dB
Fuse Rating 25A x 2
Input Sensitivity Variable 200mV~6V (+/- 5%)
Dimensions 252(W) x 58(H) x 310(L)mm