• Find a dealer near you.Find a dealer online.

E V2 Series

E-10/12/15 v.2:

The E series woofer was designed to eliminate our typical frustrations with entry level woofers; low thermal capacity, limited mechanical capacity and durability, and low motor force. The E series woofer utilize a high quality 2" copper voice coil wound on black aluminum anodized voice coil nearly 1/2" longer than the previous generation E series for increased thermal capacity and linear excursion. The coil is then mated to a large diameter, high quality Nomex spider on all three sizes fully equipped with round tied down tinsel lead wires to ensure the utmost levels of durability and mechanical silence.

Of course this is Sundown Audio so we didn't stop there -- not even with our least expensive woofer! The thermal capacity of the coil is also further enhanced by a chamfered and extended solid pole piece and direct voice coil gap ventilation -- features almost never found on an entry level woofer. The E line also features a large double stacked magnet structure for high motor force and mechanical clearance as well as robust back and top plates to channel the magnetic energy to the gap.

Xmax = 14mm one-way by 70% BL
RMS Power = 500-watts

E-8 v.3:

The E series can trace it's roots back to the E8 v.1 woofer that we launched in 2008 -- which was a stand-alone produce at the time. The E8 v.1 started our fascination with 8" woofers and led us to offer one of the most extensive selections of 8" woofers on the market today. This also explains why the E8 is one revision ahead of the rest of the E line -- a little bit of history there!

Fast forward to 2012 and the release of the E8 v.3 and we have pushed "entry level" 8 inch woofers to the next level. The E8 v.3 features soft parts field proven from the SA-8 v.1 (and 1.5 revision) series; including the cone, surround, spider, and lead wires. These are then mated to a motor nearly identical to the larger E series drivers and driven by the largest coil used in any E series 8" to date.

If you are looking for an 8" driver to perform great at lower wattages (200-300 watts) in ported boxes and for a good price the E8 v.3 is exactly what you are looking for.

Xmax = 12mm one-way by 70% BL
RMS Power = 300-watts

Specifications

Enclosure Recommendations

E8 v.3

E10

E12

E15

Sealed n/a 0.5 ft^3 1.0 ft^3 2.5 ft^3
Ported 0.5-0.75 ft^3 @ 35Hz 1.0-1.25 ft^3 @ 35hz 1.5-2.0 ft^3 @ 35hz 3.0-4.0 ft^3 @ 35hz
Displacement 0.05 ft^3 0.10 ft^3 0.12 ft^3 0.15 ft^3
Outside Diameter 8 1/4" 10" 12 1/4" 15 1/8"
Depth 5.118" 5 5/8" 6 1/2" 7 1/4"
Cut-Out 7 1/4" 8 7/8" 11 1/8" 13 7/8"

Videos

Box Specs & Cut Sheet